Xuron Track Cutter Micro-Shear® cutting action cuts quick, cuts clean, cuts square with a lot less effort than conventional compression cutters. Exclusive Xuro-Rubber™ cushion grips and Light Touch™ return spring for operator comfort and convenience. The track cutter's blades should be positioned on the top and bottom of the rail for the cleanest cut. Rated for Z, N, and HO gauge.
Trackside In California 1964-1999 Widely known for his writing in Trains Magazine and guides to rail travel in Europe and elsewhere, George Drury was also a talented photographer. California was one of his favorite domestic destinations and SP, ATSF and WP operations were well-recorded by someone who knew where to look.
Trackside In The Northeast 1946-1959 A unique look at North American railroading and life along both mainsteam roads like CP, DL&W and NYC as well as shortlines right after WWII.
This lighting controller is powered either by connecting to the City Lights 2.0 module via the network cable included or used as an independent unit with the addition of a 12VAC, 1A wall transformer (sold separately). LEDs and lamps are not included and are sold separately.
Traffic Lights simulates an active street intersection scene. A micro controller supplies six outputs for red, yellow and green prototypical intersection traffic lights. Two additional outputs provide for a flashing emergency vehicle light and a roadway obstruction barrier flasher. In operation, traffic is controlled on a main street and a side street intersection. Two light fixtures (red, yellow and green) are used for main street traffic and likewise two fixtures are used for the side street. The lights change from green to yellow to red on one street to stop traffic while the colors change from red to green on the other street to start traffic. Appropriate signal delays are built in. Also, the main street light remains green longer than the side street to allow the busiest street more time to clear the intersection.
Tru-Color Paint is a superb solvent based acrylic lacquer paint. Tru-Color Paint is available in airbrush ready satin (unless noted as flat) and brushable flat (800 series) formulas. Please note that a primer should be used on plastic models before applying the brushable paint. We currently stock 1 oz. bottles of Tru-Color Paint. Contact us for ordering 2 oz. bottles or other colors that are not listed.
A gorgeously detailed guide to the evolution, design, and role of tugboats, from the earliest days of steam to today’s most advanced ocean-going workboats. 300 color photos and drawings.
Fine-tune your car's Center of Gravity (CoG) and optimize performance and stability. Includes four 1/2 oz (14.1 g) screw-in Tungsten CoG Weights™. Use weights individually or as 2 to 4-unit sets. Screw-in and adjust with an Allen wrench. Weights are 3/4" in length tip to tip and 3/8" in diameter. Use a 23/64 size drill bit when drilling a hole for weights in the car body. 2 Sets.
Tungsten is 1.7 times denser than lead and offers more control over precise weight distribution. Place more weight in a smaller, precise area. The incremental design allows car builders to bring racers to the maximum weight allowed in exact 1/16 oz (1.77 g) increments. Designed to fit a 3/8" (9.52 mm) cavity.
Sign up and save
Subscribe now to receive exclusive offers, early access to new arrivals, and the latest updates on special discounts.
