Doc's Caboose, Inc.

• White imprint
• 5.3 oz. 100% pre-shrunk cotton
• Double-needle stitched neckline,
  bottom hem and sleeves
• Quarter-turned
• Seven-eighths inch seamless collar
• Shoulder-to-shoulder taping

• Multi-color imprint
• Cement shirts are 4.6 oz. 60/40 cotton/polyester, 30 singles
• Black shirts are 5.3 oz. 100% cotton, 20 singles
• Classic fit
  
• Tear away label
  

Navy t-shirt with white and red logo.

Red t-shirt with black and yellow Santa Fe Warbonnet logo.

Navy t-shirt with Gold logo.

2oz glass wide mouth mixing bottle.  Inner liner.  Tight Seal.  Great for mixing and storing paints.

Acrylic Resin is designed to be mixed with MIG's pigments, particularly to create mud effects. 75ml bottle.

The powder pigments are easy to use and are non-toxic. They can be combined with other products such as enamels, acrylic resin, plaster or binders to achieve different effects and textures.

MIG Productions offers a line of pre mixed washes for use with weathering models. The pre-mixed enamel based wash is available in a plastic 75ml which saves time having to custom mix the right consistency and color.  

Testors Model Master Acrylic Paint - Railroad Colors 
1/2 oz. 14.8mL Bottle

Testors Model Master Enamel Paint
1/2 oz. 14.8mL Bottle

Model Master Enamel Paint - German WWII Military Colors
1/2 oz. 14.8mL Bottle

Testors Model Master Flat Clear Lacquer is a lacquer overcoat that can be used to seal and protect painted surfaces. It can be used on a variety of materials, including wood, metal, plastic, and ceramic. 

Tamiya Extra Thin Cement
This is an excellent model cement used to glue together polystyrene plastic model kits . The extra thin formula allows the modeler to glue together small pieces that require pin point accuracy and finesse. 40ml.

Same Stuff Professional Liquid Plastic Welder
Exactly the same as ProWeld and Tenax-7R!
Solvent-type cement uses capillary action to weld styrene, acrylic, butyrate and ABS plastic. To apply, place the parts together and then put a drop on the seam. Hold for 15 seconds. In that amount of time, SAME STUFF bonds and starts to cure. This method is far superior to thicker plastic cement which is messy, harder to control and can damage expensive model kits.

Plastruct Plastic Weld
A colorless, liquid, plastic-fusing adhesive. Dissolves a thin layer of each surface to form a welded joint as strong as the surrounding area. Bonds styrene, ABS, butrate and acrylics. Brush applicator.
2 fl. oz.

"One-Drop" Applicator Bottle
1/2 oz. bottle with 25 gauge and 27 gauge steel tubes and protector cap. Allows "one-drop" control of solvent cements, CA activators and other thin liquids.