Doc's Caboose, Inc.

Santa Fe Junction is an excellent train watching spot in Kansas City!
To check out the action on this Virtual Railfan live camera Click Here.

Gold and White Weathered Imprint on Front.
Gold and White  Song Lyrics Imprint on Back.
Available in Black and Navy T-Shirts
100% Pre-Shrunk Cotton

• White imprint
• 5.3 oz. 100% pre-shrunk cotton
• Double-needle stitched neckline,
  bottom hem and sleeves
• Quarter-turned
• Seven-eighths inch seamless collar
• Shoulder-to-shoulder taping

• Multi-color imprint
• Cement shirts are 4.6 oz. 60/40 cotton/polyester, 30 singles
• Black shirts are 5.3 oz. 100% cotton, 20 singles
• Classic fit
  
• Tear away label
  

Navy t-shirt with white and red logo.

Red t-shirt with black and yellow Santa Fe Warbonnet logo.

2oz glass wide mouth mixing bottle.  Inner liner.  Tight Seal.  Great for mixing and storing paints.

Packaging:
14ml Tinlet.
Usage:
A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates.
Substrates:
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always check on a small test area to check suitability).
Application:
Apply with brush directly from container. Thin the paint with Humbrol Thinner for airbrush application.
Drying Time:
20-40 minutes touch dry and up to 24 hours for hard dry. Drying times will vary according to the ambient temperature and humidity. Recoat: 6 hours minimum (preferably overnight).
Clean Up:
Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners. Product is permanent once dry.

Tamiya Liquid Surface Primer

Brush on over scratches, rough areas etc. for a perfect smooth finish. Liquid Surface Primer can be used on plastic, metal and wooden models. Liquid Surface Primer can be further diluted using Tamiya Lacquer Thinner, allowing it to be used in airbrushes. 40ml.

Acrylic Resin is designed to be mixed with MIG's pigments, particularly to create mud effects. 75ml bottle.

Testors Model Master Acrylic Paint - Railroad Colors 
1/2 oz. 14.8mL Bottle

Testors Model Master Enamel Paint
1/2 oz. 14.8mL Bottle

Model Master Enamel Paint - German WWII Military Colors
1/2 oz. 14.8mL Bottle

Testors Model Master Flat Clear Lacquer is a lacquer overcoat that can be used to seal and protect painted surfaces. It can be used on a variety of materials, including wood, metal, plastic, and ceramic. 

Tamiya Extra Thin Cement
This is an excellent model cement used to glue together polystyrene plastic model kits . The extra thin formula allows the modeler to glue together small pieces that require pin point accuracy and finesse. 40ml.

Same Stuff Professional Liquid Plastic Welder
Exactly the same as ProWeld and Tenax-7R!
Solvent-type cement uses capillary action to weld styrene, acrylic, butyrate and ABS plastic. To apply, place the parts together and then put a drop on the seam. Hold for 15 seconds. In that amount of time, SAME STUFF bonds and starts to cure. This method is far superior to thicker plastic cement which is messy, harder to control and can damage expensive model kits.

Plastruct Plastic Weld
A colorless, liquid, plastic-fusing adhesive. Dissolves a thin layer of each surface to form a welded joint as strong as the surrounding area. Bonds styrene, ABS, butrate and acrylics. Brush applicator.
2 fl. oz.

"One-Drop" Applicator Bottle
1/2 oz. bottle with 25 gauge and 27 gauge steel tubes and protector cap. Allows "one-drop" control of solvent cements, CA activators and other thin liquids.