Switch Machines

Dimensions: 2” x 2” x 3 1/4”.
Features:

• Extremely Simple Under-Layout Mounting and all Linkage is included.
• Lowest Current Drain Switch  Machine Available (4 ma. during operation, 15—16 ma. at stall).
• Motor stalls at each end of throw—No Cutoff Contacts Necessary.
• Precision Engineered Gear-Drive Mechanism (superior to screw-drive machines).
• Enclosed Construction.
• Constant Tension on the Switch Points.

Circuitron Remote Tortoise Mount
The Circutron Remote Tortoise™ Mount consists of a molded base mechanism to which the Tortoise™ (not included) is mounted.  An adjustable lever arm is fastened onto the Tortoise™ output and drives a stainless steel wire inside a flexible teflon tube, much like a sub-miniature choke cable.  This thin wire attaches to a compact actuator mechanism and is mounted beneath the turnout.  It includes a spring wire and brass tube to transmit the motion to the points above.  The mounting bracket (with Tortoise™) may be secured in any position and up to 18” away from the turnout points—even above the layout inside a structure, if desired.  The points actuating mechanism requires 1/2” clearance under the turnout sub-roadbed.  The RTM is fully adjustable for all scales and brands of turnouts.

Circuitron Remote Signal Activator
Mounting bracket and mechanism utilize the Tortoise™ (not included) and a special drive wire cable assembly to remotely actuate any crossing gate, train order board or upper/lower quadrant sema-phore signal having a vertical control wire extending below the layout.  Signals of this type include ones manufactured by NJ International, Tomar and others. There are fully adjustable, precise, stops provided at both ends of travel for excellent repeatability.  The total travel  can be adjusted between 0.1” and 0.7” for use in all scales.  Can drive 2 cables from the one mechanism, if desired, for dual crossing gate installations.  3 position Semaphore control can be achieved with the addition of the Circuitron SD-2 Semaphore Driver.

Peco Turnout Motor
Unit installs directly beneath the turnout and makes positive contact without linkage or other complex connections. Just cut a hole in your benchwork deep enough to clear the motor and install. Fits both HO and N Scale Peco turnouts.

Peco Mounting Plates - 5 pack
Adapter for other brands of turnouts which are not self-locking. Includes over-center spring and self-locking operating arm.

MRC Power Supply For Tortoise Switch Machines
Able to drive an average of 15 slow-motion (latching) switch machine motors.
Input: 120V, 60Hz
Output:
+12VDC (Between Red & Black Wires) 300mA
-12VDC (Between Black & White Wires) 300mA
+24VDC (Between Red & White Wires) 300mA

Electronic overload protection at 500mA.